Using The Ir Remote Control - Eneo FNR-4004/500 User Manual

Using the IR Remote Control
Your NVR may also be controlled with the included IR remote control, shown in Figure 4. Batteries (2x AAA)
must be installed before operating.
The keys on the remote control closely resemble the ones found on the front panel. Referring to Figure 4, they
include:
1. POWER Button: Enable Shutdown menu of the NVR
2. DEV Button: Enables/Disables Remote Control.
3. Alphanumeric Buttons: Same as Alphanumeric buttons on front panel.
4. EDIT Button: Same as EDIT button on front panel.
5. A Button: Same as A button on front panel.
6. REC Button: Same as REC button on front panel.
7. PLAY Button: Same as PLAY button on front panel.
8. INFO Button: Reversed.
9. VOIP Button: Reversed.
10. MENU Button: Same as MENU button on front panel.
11. PREV Button: Same as PREV button on front panel.
12. DIRECTION/ENTER Buttons: Same as DIRECTION/ENTER buttons on front panel.
13. PTZ Button: Same as PTZ button on front panel.
14. ESC Button: Same as ESC button on front panel.
15. RESERVED: Reserved.
Figure 4. IR Remote Control
11