Table of Contents
Advertisement
User's Manual
Chapter 11 — Device Management
You can edit or delete the device from a list. You can also connect to a device to change its settings or
upgrade its software remotely. Run the iNEX Setup program → Select the Device menu.
All Devices: Displays devices registered in the NVR system. If you delete a device from All Devices, it
will not be available to search and play back previously recorded data even if the device is registered again
(network video devices only). Refer to 11.1 Registering Devices (p. 88) for details about registering
devices.
Device Group: Displays registered device groups. You can monitor or play back recorded video from
the cameras in device groups. You must register devices in the NVR system and add the devices to a
device group to perform any operation. Refer to 11.1 Registering Devices (p. 88) for details about
registering device groups.
Layout: Displays the registered layouts. You can monitor video from multiple cameras in a predefined
layout. Refer to 4.1 Monitoring Video, Layout Monitoring (p. 43) for details.
Layout Sequence: Displays the registered layout sequences. You can monitor video from multiple
cameras sequentially in more than one predefined layout. Refer to 4.1 Monitoring Video, Layout
Sequence Monitoring (p. 44) for details.
Camera Sequence: Displays the registered camera sequences. You can monitor video from multiple
cameras sequentially in the same camera screen. Refer to 4.1 Monitoring Video, Camera Sequence
Monitoring (p. 47) for details.
Map: Displays the registered maps. You can monitor video from cameras, event detection and input/output
device's status on a map. Refer to 4.2 Map Monitoring (p. 48) for details.
88
Advertisement
Table of Contents
