Table of Contents
Advertisement
User's Manual
Network
Don't display broken frames: It is possible that frames will be broken or lost when using the RTP protocol
depending on the network environment. Select whether or not to display the broken frames in Live or
Play panels.
Buffering Frame Count: Set up the number of buffering frames to use for the RTP protocol. The higher
the number is, the less the video stutter. The lower the number is, the higher the real-time monitoring.
Use Network Keyboard: Allows you to control the Client program by using a network keyboard.
Set up the port number that the Client program will use when it is controlled by a network keyboard.
Selecting Use large mouse cursor enlarges the mouse cursor size.
38
Use buffering for live Mega-pixel images:
Displays images on the screen more smoothly
by using buffering when monitoring mega-pixel
video images (supported only for devices which
use the iNEX protocol). Buffering may be
delayed or real-time monitoring may decrease
depending on the network environment. This
function is supported only in a dual-core CPU
or higher systems for up to four cameras in each
Live panel.
RTP Incoming Port Range: Set up the port
range if a device which transmits images using
the RTP protocol is registered. Port range
settings must be changed if the network firewall
or local network allows only specific UDP/RTP
port numbers. The port numbers should not
conflict with the RTP port number of the NVR
system or port numbers of other streaming
programs. If an RTP port number conflicts
with others, monitoring may not be available.
Advertisement
Table of Contents
