Panel - Eneo PNR-5216 Operating Instructions Manual

 Map: Displays the list of registered maps. Clicking a map in the list, and dragging and dropping it in the
desired location on the screen starts map monitoring. Refer to 4.2 Map Monitoring (p. 48) for details.

Panel

 Live: Displays live images. Refer to Chapter 4 — Live Video Monitoring (p. 41) for details.
 Play: Allows you to play back the video recorded in the NVR system (supported only for the network
video devices). Refer to Chapter 6 — Recorded Video Playback & Exportation (p. 67) for details.
 Backup Search: Allows you to play backed-up video from a backup server. (This is not supported yet.)
 DVR Search: Allows you to play back the recorded video in DVRs or SD (SDHC) memory cards inserted
to network cameras using the iNEX protocol. Refer to Chapter 6 — Recorded Video Playback &
Exportation (p. 67) for details.
 Map: Displays maps. Refer to 4.2 Map Monitoring (p. 48) for details.
 Event: Displays the list of events recorded during Event recording. Double clicking an event in the event
list, or selecting an event in the event list and then clicking the right mouse button allows you to play back
event-recorded video and event-associated video in the play screen. Refer to Chapter 6 — Recorded
Video Playback & Exportation (p. 67) for details.
 Event History: Displays log entries of events displayed on the Event Manager panel. Refer to Chapter 14
— Event Management (p. 107) for details.
 Report: Displays log entries of the iNEX program. Refer to Chapter 9 — Log Search (p. 83) for details.
 Health: Displays the results of self-diagnostics for the devices in a device group (supported only for
network video devices). Refer to 8.1 Health Monitoring (p. 81) for details.
 Status: Displays the status of a desired device in real-time (supported only for devices which use the
iNEX protocol). Refer to 8.2 Status Monitoring (p. 82) for details.
NOTE: You can change the panel name by clicking the right mouse button on each panel tab.
Adding/Deleting Panel
Floating/Docking Panel
Clicking a panel tab causes it to fly out and dragging it floats the panel on the screen. Clicking the tab of
a floating panel, and dragging and dropping it to its original position docks the panel. You can change the
order of panel tabs by dragging and dropping with the mouse.
Go to the System menu → Click New Tab → Select a panel to add.
Clicking the button beside each tab deletes the panel.
Network Video Recorder
33