Table of Contents
Advertisement
User's Manual
®
NOTE: The following screen appears when using Microsoft
®
Windows
Vista or later operating systems. It is recommended
that you check the Disable WS-Discovery Windows Service
(fdPHost, FDResPub) box. If you do not check the box, the iNEX
TM
program cannot auto-scan devices using ONVIF
Conformance
protocol when scanning devices for device registration.
NOTE: .NET Framework and the Visual C++ Runtime Libraries are installed automatically, and it may take
some time. This installation step will be skipped if the programs are already installed on your computer.
8. When the following screen appears, click the Close button
to complete the installation.
NOTE: After successfully installing the service, the service,
Service Manager program (the
icon is displayed in the
notification area of the task bar) and Setup program run
automatically.
NOTE: The following programs are provided apart from the iNEX program running (Go to the Start Menu →
Click iNEX and then Utility).
– ProblemReport, SecretKey: You will use it following the directions of your dealer or distributor when your
dealer or distributor request.
– LanguageSelector: Use it to change the iNEX program's language.
18.2 Uninstall
1. Stop running the service and Client program first.
NOTE: The iNEX software might not uninstall correctly if you uninstall it while the service or Client program is
running.
CAUTION: The iNEX software should be uninstalled following the procedures below. If you delete
the installation folder manually, the iNEX software cannot be uninstalled or reinstalled.
2. Go to the Start Menu and click iNEX. Click Uninstall iNEX.
134
Advertisement
Table of Contents
