Defining A Traffic Behavior - HP FlexFabric 5700 series Configuration Manual

Option
control-plane protocol
protocol-name&<1-8>
control-plane protocol-group
protocol-group-name
customer-dot1p
dot1p-value&<1-8>
customer-vlan-id vlan-id-list
destination-mac mac-address
dscp dscp-value&<1-8>
ip-precedence
ip-precedence-value&<1-8>
protocol protocol-name
qos-local-id local-id-value
service-dot1p
dot1p-value&<1-8>
service-vlan-id vlan-id-list
source-mac mac-address

Defining a traffic behavior

A traffic behavior is a set of QoS actions (such as traffic filtering, shaping, policing, and priority marking)
to perform on a traffic class.
Description
Matches control plane protocols.
The protocol-name&<1-8> argument specifies a space-separated list of up to
eight system-defined control plane protocols.
Matches a control plane protocol group.
The protocol-group-name argument can be critical, important, management,
monitor, normal, or redirect.
Matches 802.1p priority values in inner VLAN tags of double-tagged
packets.
The dot1p-value&<1-8> argument specifies a space-separated list of up to
eight 802.1p priority values. The value range for the dot1p-value argument
is 0 to 7.
Matches VLAN IDs in inner VLAN tags of double-tagged packets.
The vlan-id-list argument specifies a space-separated list of up to 10 VLAN
items. Each item specifies a VLAN or a range of VLANs in the form of
vlan-id1 to vlan-id2. The value for vlan-id2 must be equal to or greater than
the value for vlan-id1. The value range for the vlan-id argument is 1 to 4094.
Matches a destination MAC address.
Matches DSCP values.
The dscp-value&<1-8> argument specifies a space-separated list of up to
eight DSCP values. The value range for the dscp-value argument is 0 to 63 or
keywords shown in Table
Matches IP precedence values.
The ip-precedence-value&<1-8> argument specifies a space-separated list of
up to eight IP precedence values. The value range for the
ip-precedence-value argument is 0 to 7.
Matches a protocol.
The protocol-name argument can be ARP, IP, or IPv6.
Matches a local QoS ID in the range of 1 to 4095. The switch supports local
QoS IDs in the range of 1 to 3999.
Matches 802.1p priority values in outer VLAN tags.
The dot1p-value&<1-8> argument specifies a space-separated list of up to
eight 802.1p priority values. The value range for the dot1p-value argument
is 0 to 7.
Matches VLAN IDs in outer VLAN tags.
The vlan-id-list argument specifies a space-separated list of up to 10 VLAN
items. Each item specifies a VLAN or a range of VLANs in the form of
vlan-id1 to vlan-id2. The value for vlan-id2 must be equal to or greater than
the value for vlan-id1. The value range for the vlan-id argument is 1 to 4094.
Matches a source MAC address.
20
10.