Defining A Traffic Behavior - HP 6125G Configuration Manual

Option
dscp dscp-list
destination-mac mac-address
customer-dot1p 8021p-list
service-dot1p 8021p-list
ip-precedence
ip-precedence-list
protocol protocol-name
qos-local-id local-id-value
source-mac mac-address
customer-vlan-id { vlan-id-list
| vlan-id1 to vlan-id2 }
service-vlan-id { vlan-id-list |
vlan-id1 to vlan-id2 }

Defining a traffic behavior

A traffic behavior is a set of QoS actions (such as traffic filtering, shaping, policing, and priority marking)
to take on a class of traffic. To define a traffic behavior, first create it and then configure QoS actions,
such as priority marking and traffic redirecting, in traffic behavior view.
To define a traffic behavior:
Step
1. Enter system view.
2. Create a traffic behavior and
enter traffic behavior view.
3. Configure actions in the traffic
behavior.
Description
Matches DSCP values.
The dscp-list argument is a list of up to eight DSCP values. A DSCP value can
be a number from 0 to 63 or any keyword in
Matches a destination MAC address.
Matches the 802.1p priority of the customer network.
The 8021p-list argument is a list of up to eight 802.1p priority values. An
802.1p priority ranges from 0 to 7.
Matches the 802.1p priority of the service provider network.
The 8021p-list argument is a list of up to eight 802.1p priority values. An
802.1p priority ranges from 0 to 7.
Matches IP precedence.
The ip-precedence-list argument is a list of up to eight IP precedence values. An
IP precedence ranges from 0 to 7.
Matches a protocol.
The protocol-name argument can be IP or IPv6.
Matches a local QoS ID, which ranges from 1 to 4095.
The local QoS IDs supported on the HP 6125 switches are from 1 to 3999.
Matches a source MAC address.
Matches the VLAN IDs of customer networks.
The vlan-id-list argument is a list of up to eight VLAN IDs. The vlan-id1 to
vlan-id2 specifies a VLAN ID range, where the vlan-id1 must be smaller than
the vlan-id2. A VLAN ID ranges from 1 to 4094.
Matches the VLAN IDs of ISP networks.
The vlan-id-list is a list of up to eight VLAN IDs. The vlan-id1 to vlan-id2
specifies a VLAN ID range, where the vlan-id1 must be smaller than the
vlan-id2. A VLAN ID ranges from 1 to 4094.
Command
system-view
traffic behavior behavior-name
See the subsequent chapters, depending on the purpose of the traffic
behavior: traffic policing, traffic filtering, traffic redirecting, priority
marking, traffic accounting, and so on.
20
Table 8.
Remarks
N/A
N/A