Table of Contents
Advertisement
4 - 8
4. INSTALLATION and CONNECTIONS
4.7
Connection of External SYNC Signal for Genlock
1. EXT SYNC connector is used to input the SYNC signal of the external system desired to be genlocked with the equipment.
When the synchronizing the camera with the SYNC signal of external system, G.L indicator lights up green.
When the G.L indicator is blinking it is not genlocked. If so, check the external SYNC signal.
Reference
Camera rear view
External system
Refer to "5.3 Camera Menu" about level phase adjustment of a
synchronization.
EXT SYNC
connector
External SYNC signal
Advertisement
Table of Contents
