Framing Parameters - High End Systems DL.3 User Manual

Framing Parameters

Eight Framing parameters allow you
to clip an image from each corner in
horizontal and vertical directions.
Default DMX Value: 0 = no effect
applied.
Each corner has an x and a y value
that adjust and correct scale of the
projection from any corner toward
the image center on that axis.
Framing Top Left X DMX value = 8
Framing Top Left Y DMX value = 31
Framing Top Right X DMX value = 32
Framing Bottom Left X DMX value = 23
Framing Bottom Left X DMX value = 67
Other Framing parameter DMX values = 0
Setting all Framing X and Y parameters DMX values to zero will place the four corners of the
image at the four corners of the projector output. Adjusting framing x values across 255
(100%) clips the image from the selected x corner position horizontally toward the image.
Adjusting keystone y values toward 255 (100%) clips the image from the selected y corner
position vertically across the image.
DL.3 Digital Light User Manual
Top Left X
Top
Left Y
Bottom
Left Y
Bottom Left X
Original Content
Framing Top Left X DMX value = 5
Framing Top Right X DMX value = 188
Framing Bottom Right X DMX value = 5
Framing Bottom Left X DMX value = 188
Other Framing parameter DMX values = 0
CHAPTER 11
Global Functions
Top Right X
Top
Right Y
Bottom
Right Y
Bottom Right X
131