High End Systems DL.3 User Manual page 377

Parameter
Film Noise. Mod1 = noise rate, Mod2 = (0,127) push to
sepia, (128,255) push to sepia with jitter, Mod3 = noise
level
Particle System 1. Mod1 = emitter type, Mod2 = trail
length, Mod3 = particle acceleration
Particle System 2. Mod1 = number of particles,
Mod2 = size of particles, Mod3 = emitter size
Particle System 3. Mod1 -> particle initial velocity,
Mod2 = particle rotation, Mod3 = particle lifetime
Prism. Mod1 = number of facets, Mod2 = index of
refraction, Mod3 = rotation
Gaussian Halo. Mod1 = sample distance,
Mod2 = number of filter passes, Mod3 = shape of
Gaussian curve
Graphic
Scene Change Detect Mod1 = Scale RGB,
Effect Mode
Mod2 = RGB to Alpha, Mod3 = Scale color after alpha
1, 2 & 3
applied
Yxy Luminance Scaling. Mod1 = scale luminance
(default 64), Mod2 = scale x (default 128), Mod3 = scale
Prerotation Translation. Mod1 = translate x,
Mod2 = translate y, Mod3 = translate z
Digital Mspeed. Mod1 = rotation mspeed,
Mod2 = scaling mspeed, Mod3 = position mspeed
Reserved. Defaults to effect mode = 0
Special value used with global spherical mapping effect
142. Defaults to 0 otherwise.
Special value used with global spherical mapping effect
142. Defaults to 0 otherwise.
Pan and Scan
Graphic These Modifier parameters adjust the effect selected in
the corresponding channel of each of the three Graphic
Effect Mode
Effect Mode channels.
Modifier 1
The type of adjustment and the default value depends
Graphic
on the particular effect.
Effect Mode
NOTE: Setting the Graphic Effect Mode DMX = 253 or
Modifier 2
254 activates specific spherical mapping control options
for Modifier parameters. For more about Modifier
Graphic
parameter functionality, see
Modifier 3
on page 106, and specific effect options listed
alphabetically in Chapter 13.
DL.3 Digital Light User Manual
Description
Effect Mode Parameters
APPENDIX A
DMX Protocol
DMX Value Default
Dec. % Dec. %
94
95
96
97
98
99
NA 0
100
101
102
103
104-252
253
254
255
0-255 0-100
0-255 0-100
NA
0-255 0-100
0
NA
351