High End Systems DL.3 User Manual page 323

2. Select a DMX Source type by clicking on
the down arrow of the Source field to
select DMX512 or Art-Net.
If you select Art-Net, assign a universe
number from 1–16.
3. Select a DMX Protocol type by choosing V1, or V2 from the drop down list in the option
field. and then select the number of Graphic Object layers for your application.
The Protocol you select is based on how many DMX channels are required for your
application. For more information on selecting protocol, see Protocol Options on page 59
and Appendix A: DMX Protocol on page 321.
4. Edit the DMX Start Channel by entering a valid Start Channel for the protocol type you
have chosen.
For more information on selecting a valid start channel, see Determining a DMX Start
Channel on page 42.
DL.3 Digital Light User Manual
Content Management Application (CMA)
CHAPTER 16
297