All-In-One Control Option - High End Systems DL.3 User Manual

All-in-One Control Option

When the Global Control parameter is set to a DMX value = 253, you can use the Global
Control Modifier parameter to control the All-in-One control option. This option helps you
visualize what the graphics engine is doing. The All-in-One option maps the media file content
of Collage and Curved Surface support effects as well as up to three effects applied to graphics
objects and displays it in a multi-quadrant grid.
These effects are accessed according to rendering hierarchy used by the graphics engine, (see
Graphics Control Hierarchy on page 60).
When the Global Control parameter is set to the All-In-One option, you can view the individual
effects applied to each Graphic object in the Global Control Modifier parameter.
DMX
Value
0
Displays each defined Graphic Object with no effects applied
1
Displays the first effect (if any) applied to any defined Graphic Object
2
Displays the second effect (if any) applied to any defined Graphic Object
3
Displays the third effect (if any) applied to any defined Graphic Object
4
Displays the fourth effect (if any) applied to any defined Graphic Object
5
Displays the fifth effect (if any) applied to any defined Graphic Object
6
Displays the sixth effect (if any) applied to any defined Graphic Object
7
Displays the seventh effect (if any) applied to any defined Graphic Object
8
Displays the eighth effect (if any) applied to any defined Graphic Object
9
Displays the ninth effect (if any) applied to any defined Graphic Object
DL.3 Digital Light User Manual
Global Control Modifier Option (Global Control parameter = 253)
CHAPTER 11
Global Functions
As the next effect
level is displayed,
each object
displays the highest
level of effect
applied to that
point.
123