High End Systems DL.3 User Manual page 230

CHAPTER 13
Effect Mode Options Descriptions
Modifier 1: This parameter allows you to select from three framing modes.
DMX
Value
Frames the image using an Internal Frame profile to control the Global Fade Edge parameter
0
appearance.
Frames the image using an Internal Frame profile to control the Global Fade Edge parameter
1 appearance. Rendered Graphic Object content is selected at Frame texture using Modifier 3
parameter
Image clipping changing operation of the Global Image Edge Fade parameters to Emulate Framing
2
Shutters
Modifier 2: When the Modifier 1 DMX value = 0 or 1, this channel selects from profiles that
vary in gradient density or pattern. When Modifier 1 DMX value = 2, this Modifier is not used.
Modifier 3: When Modifier 1 DMX Value = 1, this parameter determines how to use the
rendered Graphic Object content as a texture for the frame.When Modifier 1 DMX value = 2, this
Modifier is not used.
Modifier 1
DMX
DMX Value
value
0 Not Used
NA
Graphic Object 1 texture without applied Effects
0
Graphic Object 1 texture including its first applied Effect
1
Graphic Object 1 texture including its first two applied Effects
2
Graphic Object 1 texture including its first three applied Effects
3
Graphic Object 2 texture without applied Effects
10
Graphic Object 2 texture including its first applied Effect
11
1
Graphic Object 2 texture including its first two applied Effects
12
Graphic Object 2 texture including its first three applied Effects
13
Graphic Object 3 texture without applied Effects
20
Graphic Object 3 texture including its first applied Effect
21
Graphic Object 3 texture including its first two applied Effects
22
Graphic Object 3 texture including its first three applied Effects
23
2 Not Used
NA
204
Action
Modifier 3
Action
DL.3 Digital Light User Manual