Segment Selection Examples - High End Systems DL.3 User Manual

CHAPTER 7
Graphic Functions: Defining Content
In Frame Default DMX Value: 0 = The beginning of a media file is the playback start point.
Out Frame Default DMX Value: 65535 = The end of a media file is the playback endpoint.
As you move from 0 to 100% of the In Frame value range, you can select the beginning of a
media file segment as a percentage of the file length. Moving from 0 to 100% of the Out Frame
value range selects the end of a media file segment as a percentage of the file length.

Segment Selection Examples

You can create a segment anywhere between
the beginning and the end of a media file.
The In Frame does not have to precede the
Out Frame.
To skip a segment in the center of a media
file, set the In Frame to a point following the
Out Frame. The file will play from the
In Frame to the end and then start at the
beginning of the file and play to the
Out Frame. When you create a segment in
this way, you may notice a jump as playback
skips from the end of the file to the
beginning.
68
Example 1
In Frame
File
25%
Start
Example 2
Out Frame
File
25%
Start
Out Frame
File
End
75%
In Frame
75%
End
DL.3 Digital Light User Manual
File