Film Noise - High End Systems DL.3 User Manual

CHAPTER 13
Effect Mode Options Descriptions

Film Noise

Effect Mode parameter DMX value = 94
This effect creates the effect of scratches on film. You can adjust the amount of "noise" as well
as the tint and "jitter" to give the image an aged film effect.
Modifier 1: Adjusts the noise rate. A DMX value of 128 (50%) pauses the noise. Values below
the midpoint adjust the rate from 0 = fastest to 127 = slowest. Values above the midpoint
adjust the rate from 129 = slowest to 255 (100%) = fastest.
Modifier 2: Shifts the color to a sepia tint, 128 = no adjustment, 0 to 127 = full sepia. Values
above the midpoint of the range repeat the push to sepia with jitter added from 129 (51%) =
full color and no jitter to 255 (100%) = full sepia and maximum jitter.
Modifier 3: Reduces the noise level from 0 = maximum noise to 255 (100%) = no noise.
Original Content
200
Object Effect
Modifier 1 parameter DMX = 157
Modifier 2 parameter DMX = 94
Modifier 3 parameter DMX = 26
Global Effect
DL.3 Digital Light User Manual