Table of Contents
Advertisement
CHAPTER 17
Maintenance and Troubleshooting
Button Action
When in the large format display, pressing any
button reverts to the normal menu display showing
the Detailed Message Display pane in the
Info_Status tab of the menu. At that point, you can
view the detailed information for the error/warning
messages or navigate elsewhere.
Inactivity Timer
After 30 seconds of inactivity from the display
navigation/editing buttons has passed, the display
returns to the large format error display should there be any new messages to be displayed or if
there is a persistent error. A persistent error is a case where the error condition continues to
occur.
The second way to view Status messages is by navigating to the Info_Status screen. This screen
displays current error or status messages. If there are multiple error/warning messages
displayed, use the up/down arrows to scroll through the list in the top pane. When an item is
highlighted in the top pane, the bottom pane details information associated with that error.
Supported Error/Warning Messages
Issue
Large Format Message
Projector
Temperature Status
Info_Status tab only
This message does not
appear in large format
Motion Shut Down
Status
Camera
Communication
CAMERA COMM ERROR
Error
Filter Missing Error
FILTER MISSING ERROR
Service Filter Error
FILTER SERVICE ERROR
Filter Service
FILTER SERVICE WARN
Warning
312
Message Detail
PROJ STATUS-COOLING
The projector must cool
down before it can re-strike
the lamp
Motion Shut Down
The Motion Systems is in
shut down mode. To return
to normal operation, power
cycle or perform a HOME
ALL
The system is unable to
communicate with the
Camera.
Filter not present. Insert
Filter!
Filter needs Servicing.
Replace Filter NOW.
Filter needs Servicing.
Replace Filter SOON.
Notes
This message will end when
the fixture has reached the
recommended operational
temperature
Home the fixture through the
menu system "Test_Home_
Motion All_Home" screen, the
CMA, (see page 287) or
from the DMX console (see
page 242).
Check the Ribbon cable
connections at the camera
and the head card. (the Blue
side should be facing out).
Use the camera's zoom
buttons to check that the
camera has power.
See Cleaning and
Replacing Filters on page
300
See Cleaning and
Replacing Filters on page
300
DL.3 Digital Light User Manual
Advertisement
Table of Contents
Troubleshooting
