System State Leds - High End Systems DL.3 User Manual

Issue Large Format Message
Projector Lamp Life
LAMP LIFE ERROR
Error
Projector Lamp Life
LAMP LIFE WARN
Warning
Projector
Communication PROJ COMM ERROR
Error
Projector
Temperature Fail PROJ TEMP ERROR
Error
Projector
Temperature PROJ TEMP WARN
Warning
USB port
Communication USB INIT ERROR
Error
USB port Security
USB SECURE ERROR
Error

System State LEDs

Five labeled LEDs on the display panel indicate the following system activity:
Name Color
On
Projector White Off
Blinking
On
Blinking
Status Green
Blinking
Slowly
Drive Amber Blinking
Server Blue Steady
Power Red Steady
DL.3 Digital Light User Manual
The Lamp has exceeded its
rated life and must be
replaced now.
The Lamp is nearing the end
of it's rated life. Replace
soon
The system is unable to
communicate to the
Projector.
Projector temperature has
exceeded operational range
and has shutdown
Projector is over
recommended operating
temperature
The PC failed to initialize
USB communication with the
box card.
USB failed to pass the
hardware security test.
State
Projector lamp is on
Projector lamp is off
Projector lamp is either cooling down or in a indeterminate state
(45 sec On/1.4 sec.Off) Running normal motion-control code
Board communication activity; for example, during a software upload
320 processor card in the base housing is receiving code.
Hard drive activity
Internal computer is receiving power
Fixture's Motion Control system is receiving power
Maintenance and Troubleshooting
Message Detail
Description
CHAPTER 17
Notes
See Replacing the Lamp
on page 303.
Check the Comm cable
connections at serial port on
the back of projector and at
the fixture head card.
Make sure lamp is struck
Cool fixture and then restrike
the lamp
Contact High End Systems
Customer Support
313