Framing Parameters - High End Systems DLHD High Definition Digital Light User Manual

CHAPTER 11
Global Functions

Framing Parameters

Eight Framing parameters allow you
to clip an image from each corner in
horizontal and vertical directions.
Default DMX Value: 0 = no effect
applied.
Each corner has an x and a y value
that adjust and correct scale of the
projection from any corner toward the
image center on that axis.
Framing Top Left X DMX value = 8
Framing Top Left Y DMX value = 31
Framing Top Right X DMX value = 32
Framing Bottom Left X DMX value = 23
Framing Bottom Left X DMX value = 67
Other Framing parameter DMX values = 0
Setting all Framing X and Y parameters DMX values to zero will place the four corners of the
image at the four corners of the projector output. Adjusting framing x values across 255 (100%)
clips the image from the selected x corner position horizontally toward the image. Adjusting
keystone y values toward 255 (100%) clips the image from the selected y corner position
vertically across the image.
96
Top Left X
Top
Left Y
Bottom
Left Y
Bottom Left X
Original Content
Framing Top Left X DMX value = 5
Framing Top Right X DMX value = 188
Framing Bottom Right X DMX value = 5
Framing Bottom Left X DMX value = 188
Other Framing parameter DMX values = 0
Top Right X
Top
Right Y
Bottom
Right Y
Bottom Right X
DLHD Digital Light User Manual