Zoom Blur - High End Systems DL.3 User Manual

Zoom Blur

Effect Mode parameter DMX value = 59
Zooms into a position on the image with a mult-image blurring effect. You can control the
position of the zoom center on the image.
Modifier 1: The default DMX value of 128 (50%) = no adjustment. Values below the midpoint
move the horizontal center of the zoom right to 0 = maximum. Values above the midpoint move
the horizontal center of the zoom left to 255 = maximum.
Modifier 2: The default DMX value of 128 (50%) = no adjustment. Values below the midpoint
move the vertical center of the zoom down as you approach 0 = maximum. Values above the
midpoint move the vertical center of the zoom up to 255 (100%) = maximum.
Modifier 3: The default DMX value of 128 (50%) = no adjustment. Values below the midpoint
zoom in to the image centerpoint to 0 = maximum image size. Values above the midpoint zoom
away from the image centerpoint to 255 = a minimum image size.
NOTE: This effect is also available as a Visual Mode adjusted with 2 Modifier
parameters, (see Zoom Blur on page 131.)
Original Content
DL.3 Digital Light User Manual
Effect Mode Options Descriptions
Object Effect
Modifier 1 parameter DMX = 128
Modifier 2 parameter DMX = 128
Modifier 3 parameter DMX = 255
CHAPTER 13
Global Effect
239