Table of Contents
Advertisement
CHAPTER 9
Graphic Functions: Opacity and Effects
Visual Mode Options
Color to B/W
Visual Mode Parameter DMX value = 7
Begins with a white screen and fades to the original image in black and white. All color is
converted.
Modifier 1: Transitions the image from full white at a DMX value of 0 to black and white at a
value of 128 (50%). Increasing values above 50% reveals more of the image in black and white
to complete at a value of 255 (100%).
Modifier 2: Not Used
Content Optimization
Visual Mode Parameter DMX value = 1
Stock content provided by High End Systems on your DL.3 fixture has been optimized for
lighting applications. This option lets you make the same adjustments for User content or
camera input. Content Optimization adjusts the image Black level and Contrast to optimize the
projected image for your performance environment. You can use it to easily modify the black
level and contrast for a specific application. The Exposure Control visual mode option (see
Exposure Control on page 89) provides an alternative algorithm for accomplishing this
optimization.
Modifier 1: Adjusts black level from 0 = no adjustment to 255 (100%) = full black.
Modifier 2: Adjusts contrast from 0 = no adjustment to 255 (100%) for maximum contrast.
Tip: All the factory content provided has been optimized already. This parameter and the
Exposure Control visual options are especially useful for optimizing User content or camera
capture.
86
DL.3 Digital Light User Manual
Advertisement
Table of Contents
Troubleshooting
