Table of Contents
Advertisement
Main
Sub-Tabs/
Tab
Screens
Fixture
Projector
Set
I/O
(not available in
DL.3F fixtures)
File
DL.3 Digital Light User Manual
Fields
Options
Controls
On
Display
Off
Invert
Auto
On
Factory
Defaults
Off
On
Projector
Lamp
Off
Always
Projector
Manual
Powerup
DMX
On
Zoom
Override
Off
On
Focus
Override
Off
On
Projector
Ceiling
Off
On
Projector
Rear
Off
Standard
Long
Lens Type
Ultra Long
Wide
Projector Defaults
External
Projector
Input
Internal
Yes
Projector In
by DMX
No
Internal
S-Video Input
External
External SVideo Format
SDI Format
The Digital Light Menu System
Function/Notes
Inverts menu display and navigation
Turns off the display invert
Automatically inverts display when fixture
mounting is greater than 45°
Restores factory default settings
Default
Manually turns Projector Lamp on
Manually turns Projector Lamp off
Turns the projector lamp on whenever the
fixture is connected to power
Turns on the lamp when Projector Lamp = On
Turns the projector lamp on with DMX
input (default)
Overrides the DMX values sent by the console.
Set value manually from 0-255
Default
Overrides the DMX values sent by the console.
Set value manually from 0-255
Default
Rotates the image 180° around the x-axis
Default
Rotates the image 180° around the y-axis
Default
Selects the lens currently installed in the
projector.
NOTE: these options are active for DL.3
fixtures only
Clicking the Reset button restores Factory
Projector Defaults
Chooses the input the Projector will accept
Selecting Yes allows projector's input source to
be selected from DMX
Disables changing projector input via DMX
Accepts S-Video signal from the DL.3 onboard
camera input
Accepts S-Video signal from another DL.3 or
video source
Options dependant on the fixtures video card
configuration
Displays content file locations and allows a
content preview (see page 40).
CHAPTER 3
27
Advertisement
Table of Contents
Troubleshooting
