Table of Contents
Advertisement
CHAPTER 15
Live Video Input and Control
Live Video Connection Options
The DL.3 fixture has video connectors for RGBHV, VGA and S-Video on its rear panel, as shown in
the following figure.
including hard drives
USB 1
USB 2
100-120 V;
50-60Hz; 7A
200-240 V;
50-60Hz; 3.5 A
S-Video Camera
Output to another
DL.3 fixture or device
CAUTION:
To avoid damaging the fixture and voiding the warranty, do not
physically connect to the RGBHV and VGA inputs at the same time.
Configuring the Video Input Source
S-Video
DL.3 fixtures support multiple SVideo formats including:
NTSC_M
NTSC_MJ
You will need to configure the DL.3 fixture to identify a video input source. You can choose
between S-Video and SDI in one of the following ways:
• Manually using the DL.3 menu system (see information about the Projector Input field on the
Set_I/O Screen on page 35.)
• Remotely through the CMA (see DL.3 and DL.2 Media Server Configuration Options on page
282).
• Via the DMX console commands (see Projector Control on page 243).
NOTE: The integrated camera provides an NTSC_M video signal.
246
VGA input to
the projector
S-Video In to
the graphics engine
PAL_B
PAL_H
PAL_D
PAL_I
PAL_G
PAL_M
PAL_N
running the CMA
SDI Output
RGBHV input option
to the projector
SECAM_B
SECAM_K
SECAM_D
SECAM_K1
SECAM_G
SECAM_L
SECAM_H
SECAM_L1
DL.3 Digital Light User Manual
SDI Input
Advertisement
Table of Contents
Troubleshooting
