ENGINE DISASSEMBLY / ASSEMBLY
Engine Disassembly Process
4. Remove
the
stator
housing.(Photo D)
NOTE: The stator is attached to the inside of the
cover. Note the two alignment dowels as circled in
photo.
5. Photo of stator inside of cover. (Photo E)
6. Remove the water pump cover and impeller.
(Photo F)
NOTE: The impeller can be removed by turning the
nut counter- -clockwise. Hold the flywheel stationary
while removing the impeller.
4.22
cover
from
the
flywheel
2004 Four Stroke PWC Service Manual
PHOTO D
PHOTO E
PHOTO F