Exhaust Cooling Injector Maintenance; Throttle Cable Adjustment - Polaris msx 110 Service Manual

Exhaust Cooling Injector Maintenance

The exhaust pipe rubber hoses and muffler are cooled by injecting a small amount of water injected through an orifice
from the freshwater cooling system into the exhaust stream. The orifice should be inspected and cleaned periodically
to ensure proper cooling of the exhaust muffler and connector hoses. Be sure hoses are not restricted (kinked or
collapsed internally).
CAUTION:
1. Loosen clamp connecting hose to fitting and remove
hose.
2. Inspect and clean orifice.
3. Reinstall cooling hose.

Throttle Cable Adjustment

The throttle cable connects the throttle flipper with the Pedal
Position Unit (PPU). The cable is located underneath the
steering helm.
1. Turn adjuster clockwise to loosen the throttle flipper
freeplay. Turn counter--clockwise to tighten flipper
freeplay.
NOTE: Verify throttle cable is not kinked after per-
forming procedure.
2004 Four Stroke PWC Service Manual
MAINTENANCE
Throttle Cable
FRESHWATER INJECTOR
.185"
FRESHWATER INJECTOR
Adjuster
Lock Nut
2.19