ASCOM IPBS Installation And Operation Manual page 85

Installation and Operation Manual
IP-DECT Base Station & IP-DECT Gateway (software version 5.0.x)
3 Select "Self-signed certificate" in the Type drop-down list.
4 Select/Enter the following settings:
Field name
• Validity
• Key
• Common Name
• DNS Name
5 Click "OK".
6 A new key pair and a certificate will be created. This may take up to one hour
depending on the key strength selected. During this time the device will be fully
operational with the exception of https not working and the certificate tab pane
not being visible.
Certificate Signing Request (CSR)
This section corresponds to option 3A & 3B in
be the most common options for IP-DECT systems. For more information on CSRs see
Certificate Authorities
1 Select Configuration > General > Certificates.
15 February 2012 / Ver. H
Description
Enter the default validity in years. This is a mandatory
field.
Select either the desired key strength (1024-bit, 2048-
bit, 4096-bit) or select to reuse the old key pair (this is
not recommended).
Enter the domain name or IP address for the device.
This is the same value as entered in the web browser
when accessing the device.
If the device has got a DNS name it should be entered
here. It will be stored as a subjectAltName (SAN) in the
certificate. The format of this field is a FQDN (e.g.
host.domain.com).
4.2.2 TLS Certificates
on page 22.
TD 92579EN
on page 24. This will
77