Table of Contents
Advertisement
Installation and Operation Manual
IP-DECT Base Station & IP-DECT Gateway (software version 5.0.x)
2.1.2
IPBS1 with External Antennas
The IPBS1 is available with two omni-directional external antennas. Other external
antennas can be mounted as well. This section contains the differences between the IPBS1
with internal and external antennas. For all other information see
Antenna
on page 3.
Contents of the Box
The box in which the IPBS1 is packed contains:
• An IPBS1 for external antennas
• Two antennas
• A mounting bracket
• Two screws with wall plugs
Note: The IPBS1 cannot be mounted with the antennas pointing downwards as the
mounting bracket does not support it.
Insert the antennas into the IPBS1 before following the installation instructions in
Install the Base Station
15 February 2012 / Ver. H
on page 27.
TD 92579EN
2.1.1 IPBS1 with Internal
5.2
5
Advertisement
Table of Contents
Need help?
Do you have a question about the IPBS and is the answer not in the manual?
Questions and answers