ASCOM IPBS Installation And Operation Manual page 101

Installation and Operation Manual
IP-DECT Base Station & IP-DECT Gateway (software version 5.0.x)
Feature
Call Forwarding No Reply
Do Not Disturb
Call Waiting
Call Completion Busy Subscriber
Logout User
Clear Local Settings
MWI Mode
MWI Interrogate Number
MWI Notify Number
Local Clear of MWI
External Idle Display
15 February 2012 / Ver. H
Description
Forwards incoming calls to a given number
if the call is not answered or there is no
coverage
Sets the handset in busy mode
A second incoming call during a call is
indicated with a call waiting tone
Notifies the caller when a busy number
becomes available and reinitiates the call.
Only works on H.323
Logs out the user and the handset
becomes anonymously subscribed.
Clears all locally stored feature settings
and all features are deactivated
MWI (Message Waiting Indication) enables
the receiving of a notification from an IP-
PBX when, for example, a voice mail is
available for listening.
There are four modes that can be selected
to enable MWI:
Fixed interrogate and fixed notify number
User dependent interrogate number
User dependent notify number
Both numbers users dependent
"Fixed" means that a common call
number is used for all users.
"User dependent" means that the user's
own call number is used.
The number used by the handset when it
checks with the IP-PBX if there are any
message waiting indications to be notified
about.
A call number shown in the handset
display when receiving a MWI notification.
To receive the stored message the user dial
the number.
If necessary, enter the number of the
message center in this field to clear the
message waiting indication locally when
dialling the number.
Depending on type of IP-PBX, absence and
call forwarding texts will be displayed on
the handset when idle. Note: If call
forwarding is handled by the IP-PBX, the
following options must be disabled:
Call Forwarding Unconditional
Call Forwarding Busy
Call Forwarding No Reply
TD 92579EN
93