Table of Contents
Advertisement
Installation and Operation Manual
IP-DECT Base Station & IP-DECT Gateway (software version 5.0.x)
5
Select/Edit any of the following settings:
• Long Name
• Name (NOTE: This field is used for login)
• Password
• Confirm Password
6
Click "OK".
Delete a User Administrator
1
Login as System Administrator (see
2
Select "Users".
3
Click "show".
4
In the User Administrators section, click the hyperlink to be deleted below the Long
Name heading. An Edit User window is opened.
5
Click "Delete".
The User Administrator is deleted and the windows is closed.
7.4
Configure the Mobility Master
In a system with two or more Masters (Multiple Master system), a Mobility Master must be
configured. For more information on Multiple Master Systems, see the applicable System
Planning documentation for IP-DECT.
This section describes how to configure the Mobility Master. Each configuration step is
briefly described in the step list below. For more detailed information see the
corresponding subsection in
1
Determine the address and access the GUI, see
2
Change the default password, see
3
Set a static IP address and set DHCP to off, see
80.
4
Set the mode to Mobility Master, see
97.
5
Write a login name and enter a password, see
on page 97.
6
Connect to other Mobility Master(s), see
Mobility Master(s)
7
Enter the Time Server address, see
7.5
Configure the Standby Mobility Master
It is recommended to have a Standby Mobilty Master in a Multiple Master IP-DECT system.
This section describes how to configure the Standby Mobility Master. Each configuration
step is briefly described in the step list below. For more detailed information see the
corresponding subsection in
1
Determine the address and access the GUI, see
2
Change the default password, see
15 February 2012 / Ver. H
7.3.5 System Administrators
8 Operation
on page 60.
7.2.2 Change the Default Password
8.5.18 Select Mobility Master Mode
8.5.19 Connect Mobilty Master to other
on page 98.
8.1.5 Configure the NTP Settings
8 Operation
on page 60.
7.2.2 Change the Default Password
TD 92579EN
on page 47).
7.2 Access the GUI
on page 42.
8.2.2 Set a Static IP Address
8.5.18 Select Mobility Master Mode
on page 68.
7.2 Access the GUI
on page 42.
on page 44.
on page
on page
on page 44.
50
Advertisement
Table of Contents
Need help?
Do you have a question about the IPBS and is the answer not in the manual?
Questions and answers