Individual Registration - ASCOM IPBS Installation And Operation Manual

Installation and Operation Manual
IP-DECT Base Station & IP-DECT Gateway (software version 5.0.x)
5 Repeat step 3 - 4 for all handsets.
Note: For safety reasons, when the Anonymous Registration is finished change the
Subscription Method to "Disable"otherwise anyone could register to the IP-DECT System.
See below for more information.
6 Select DECT > System.
7 Disable anonymous registration by selecting "Disable" in the Subscription drop-
down list. Click "OK".

7.13.2 Individual Registration

1 Select DECT > System.
2 In the Subscriptions drop-down list, select "With System AC" or "With User AC".
Click "OK".
Tip: See also
3 Select "Users".
4 Click "New".
5 Enter the following information in the corresponding text fields:
Field name
• Long Name Mandatory, the name of the user, need to be unique
• Display
Name
• Name
• Number
• Password
• Idle Display Optional, will be shown in the handset display when
• IPEI / IPDI
• Auth. Code Optional, the individual authentication code for this
6 Perform an "over air subscription" using the individual authentication code. For
information on how this is done, see the reference guide of the handset.
7 Click "OK".
15 February 2012 / Ver. H
8.5.2 Set Subscription Method
Description
throughout the system.
Optional and only available when using the Ascom
VoIP Gateway, the calling or called party name will be
shown in the handset display (depending on whose
handset).
Optional, the user name.
Mandatory, the phone number extension, need to be
unique throughout the system.
Optional, is used for registration towards the
gatekeeper.
the handset is idle.
Mandatory, the unique identification number of the
handset.
user. Automatically created by default. Can be
modified manually.
on page 89 for more information.
TD 92579EN
Max.
characters
30
30
30
30
30
47
57