ASCOM IPBS Installation And Operation Manual page 171

Installation and Operation Manual
IP-DECT Base Station & IP-DECT Gateway (software version 5.0.x)
4 In the "New Resource Record" window, see
Enter "_sip" in the Service field.
Enter _udp in the Protocol field.
Assign a priority and weight. For information on how to set priority and weight, see
E.2.3 About SRV Records
Enter "5060" as the port number.
Enter the host name of your SIP server (IP-PBX). Note: The host name must be a fully
qualified domain name (FQDN).
Click "OK".
Figure 5. New resource record settings
5 You can view your new SRV record by clicking on the _udp item under your
domain.
6 Right click the domain (or subdomain) where the new SRV record is located and
select "New Host (A)...".
15 February 2012 / Ver. H
Figure
on page 160.
TD 92579EN
5, do as follows:
163