Routes - Configuration - ASCOM IPBS Installation And Operation Manual

Installation and Operation Manual
IP-DECT Base Station & IP-DECT Gateway (software version 5.0.x)
• Supress Subaddress
4 Click "OK".
Call Number Mappings
Call number (CGPN/CDPN) mappings are described in
on page 118.
8.13.5 Routes – Configuration
Call routing determines which calls are able to be accepted by the gateway and where
they are to be switched.
1 Select Gateway > Routes.
All configured routes are shown in a routing table.
Insert Route below
2 a. If no routes have been configured, click on the
b. Add a new route by clicking on the leftmost
insert the new route after.
Note the order of the routes here. The new route is always inserted after the current
entry. A new window opens.
15 February 2012 / Ver. H
Suppresses the transmission of "Subaddresses" on the
interface.
Insert Map Insert Map
above below
TD 92579EN
Call Number (CGPN/CDPN) Mappings
Edit Route Edit CGPN Map
in front of From.
in the route which you want to
122