ASCOM IPBS Installation And Operation Manual page 124

Installation and Operation Manual
IP-DECT Base Station & IP-DECT Gateway (software version 5.0.x)
3 Select/Enter following settings:
Field name
• Name
• Disable
• ID
• Proxy
• STUN Server
Authorization
• Username
• Password / Retype
Media Properties
• General Coder
Preference
• Framesize
15 February 2012 / Ver. H
Description
Enter a name for the SIP interface
Select the Disable check box to disable the Interface
Enter the registration ID followed by the SIP provider
domain name preceded by an @ (for example
8111111e0@sipgate.de).
The IP address of the SIP provider to where the SIP
messages (REGISTER,INVITE,etc.) are to be sent.
Only necessary if the SIP server is outside the private
network.
Note: STUN Server has not been tested and is not
officially supported by the Ascom IP-DECT System.
Username for authorization (only if different from the
registration ID).
The password for authorization must be specified here
(Password) and confirmed (Retype).
Select the applicable coder in the drop-down list.
Enter the sample time in milliseconds.
TD 92579EN
116