ASCOM IPBS Installation And Operation Manual page 70

Installation and Operation Manual
IP-DECT Base Station & IP-DECT Gateway (software version 5.0.x)
6 Select/Enter the following information for the users of the realm.
Field Name
Name
Password
Retype
Password
Role
7 Click "OK".
Set up the client
Depending on the type of system the IPBS/IPBL can be configured to act as a client in three
different ways:
• Configure IPBS/IPBL as a client in a small existing system (few clients), see
IPBS/IPBL as a client in a small existing system (few
• Configure IPBS/IPBL as a client in a large existing system (many clients), see
IPBS/IPBL as a client in a large existing system (many clients)
• Configure IPBS/IPBL as a client in a new system, see
new system
Configure IPBS/IPBL as a client in a small existing system (few clients)
The location of the Kerberos server must be configured locally on each client. The server
must be configured as a client as well so that it can also join the realm. To configure each
IPBS/IPBL as a client, do the following:
1 Make sure that the IP address of a NTP time server is specified. Select General >
NTP.
2 Select General > Admin.
3 Go to the Authentication Servers section.
4 In the Realm/Domain text field, enter the realm name specified in the Kerberos
server.
5 In the Address text field, enter the IP address of the Kerberos server. In the Kerberos
server enter 127.0.0.1 (localhost) as the IP address. The Port text field is filled out
automatically.
6 Click "OK".
Join the realm
To enable delegated authentication using the Kerberos server, each client must join the
Kerberos realm of the server. To join the realm, do the following:
15 February 2012 / Ver. H
Description
Enter a login user name
Enter a password
Confirm password
• Administrator: Write access to all
device parameter settings
• Auditor: Read access to device
parameter settings
• Join Realm: Add devices to the
realm
on page 64.
TD 92579EN
Configure
clients).
Configure
on page 63.
Configure IPBS/IPBL as a client in a
62