Table of Contents
Advertisement
EDITION 04/2012
OPERATING MANUAL
Spray gun GM 5000EACW (order no. 2309873) can be combined with different hose sets.
The available hose sets are listed in the accessories (Chap. 11.4).
Disassembling gun assy. (1)
1. Secure the spray gun.
2. Push bared part of material hose approx. 1.15 m; 3.77 ft through the opening as far as
the mounting plate.
3. Fix mounting plate (3) to earthing screw with knurled nut (2).
4. Screw air hose for the spray gun (4) to the AquaCoat cabinet.
5. Connect gun cable (5) to AquaCoat cabinet and secure with screw.
6. Screw bared end of material hose (3) with union nut (6) to relief combination.
8.5
CHANGE MATERIAL HOSE AND/OR AIR HOSE
1. Loosen and unscrew clamping screw (1).
2. Loosen nut (2) and remove material hose from the attachment point.
3. Push protective hose (4) back.
4. Carefully remove material hose (3) from the protective hose (4).
5. Loosen union nut (5) at gun connection and carefully remove air hose (6) from the
protective hose (4).
1
PART NO. DOC2321362
5
2
3
4
B_03546
AquaCoat GM 5000EACW
6
80
Advertisement
Table of Contents
