Table of Contents
Advertisement
EDITION 04/2012
OPERATING MANUAL
Pos Description
10
Earthing cable
11
Material pressure generator such as pneumatic pump or double diaphragm
pump
12
Suction system, compl.
13
Paint container
14
Earthing switch (Cylinder AquaCoat)
15
Earthing band
16
Filter-relief combination
17
Door switch
19
Leakage resistance 3GOhm
20
Air hose (material pressure generator)
22
High voltage cable (2 pieces)
23
Base frame assy. (available, however, as additional extra)
24
Hose holder assy. (available, however, as additional extra)
26
Return hose
The AquaCoat spray system is designed for processing non-combustible liquids in
accordance with the AirCoat method.
The spray product is regulated via the trigger guard on the spray gun (4) and by the
VM5000W control unit (3), drawn in with a material pressure generator (11) via a suction
system (12), electrostatically charged in the sealed off inner chamber of the AquaCoat
cabinet (1) and sprayed in the nozzle of the spray gun with the help of AirCoat air.
The material pressure generator and spray gun are connected by the high pressure
material hose.
The following functions are provided for system safety:
The earthing switch (14), the door switch (17), the earthing strip (15) and the integrated
AquaCoat resistor (19).
:
Note
Only mount or remove the front panel
(2) when the control unit (3) is switched
off. 1 second after the control unit (3) has
been switched off, the system is earthed
and the door lock opened.
PART NO. DOC2321362
AquaCoat GM 5000EACW
22
Advertisement
Table of Contents
