Cleaning; Handling Hazardous Liquids, Varnishes And Paints; Touching Hot Surfaces; Correct Use - WAGNER AquaCoat AirCoat GM 5000EACW Operating Manual

EDITION 04/2012
OPERATING MANUAL
2.2.4

CLEANING

2.2.5

HANDLING HAZARDOUS LIQUIDS, VARNISHES AND PAINTS

When preparing or working with paint and when cleaning the unit, follow the working
instructions of the manufacturer of the paints, solvents and cleaning agents being
used.
Take the specified protective measures, in particular wear safety goggles, protective
clothing and gloves, as well as hand protection cream if necessary.
Use a mask or breathing apparatus if necessary.
For sufficient health and environmental safety: Operate the unit in a spray booth or on
a spraying wall with the ventilation (extraction) switched on.
Wear suitable protective clothing when working with hot materials.
2.2.6

TOUCHING HOT SURFACES

➞ Touch hot surfaces only if you are wearing protective gloves.
➞ When operating the unit with a coating material with a temperature of > 43 °C; 109.4 °F:
- Identify the unit with a warning label that says „Warning - hot surface".
Order No.
9998910 Information label
9998911 Safety label
2.3

CORRECT USE

2.4

SAFETY-RELEVANT INFORMATION ABOUT DISCHARGES

PART NO. DOC2321362
AquaCoat GM 5000EACW
9