Table of Contents
Advertisement
EDITION 04/2012
OPERATING MANUAL
5.1.2
AIR SUPPLIES
You must ensure that only dry, clean atomizing air is used in the spray gun. Dirt and moisture
in the atomizing air reduce the spraying quality and the appearance of the fi nished piece.
5.1.3
PAINT SUPPLIES
Impurities in the spraying system!
Spray gun blockage, materials harden in the spraying system
Flush the spray gun and paint supply with a suitable cleaning agent.
SIHI_0001_GB
Bursting hose, bursting threaded joints!
Danger to life from injection of material
SIHI_0029_GB
Electrical discharges!
Danger due to electrically charged material lines
SIHI_0128_GB
PART NO. DOC2321362
CAUTION
Ensure that the hose material is chemically resistant.
Ensure that the spray gun, threaded joints and material hose
between the unit and the spray gun is suitable for the pressure
generated in the unit.
Ensure that the following information can be seen on the high
pressure hose:
- Manufacturer
- Permissible operating pressure
- Date of manufacture.
The conductive sheath of the material hose must not be remo -
ved and the connections to the earth potential must not be loo -
sened.
1. Earth connection in the cabinet.
2. Earth connection in the gun.
AquaCoat GM 5000EACW
DANGER
CAUTION
34
Advertisement
Table of Contents
