Setting The Current Limiting - WAGNER AquaCoat AirCoat GM 5000EACW Operating Manual

EDITION 04/2012
OPERATING MANUAL
5.4.13

SETTING THE CURRENT LIMITING

80 100
60 80
R1
40 60
20 40
R2
10 20
kV μA
R3
6 5
80 100
60 80
R1
40 60
20 40
R2
10 20
kV μA
R3
22
Above the „current limiting" button (5) is the „Current limiting" bar graph display (22). When
the control unit is in the ready position, this display shows the set point as a dot.
The current limiting is an adjustable threshold. If this threshold is exceeded, for example by
approach of the spray gun to the spraying object, the high-voltage is adjusted downwards
until the threshold is no longer exceeded.
The values set in the examples for target high voltage at 40 kV and current limiter at 83 µA
are stored in R2 through prolonged pressing of the recipe pushbutton (> 2 sec.).
PART NO. DOC2321362
Works procedure:
1. Press the „Current limiting" button (5)
to adjust the limitation of the spray
current. The LED (6) indicates that
POWER
POWER current limiting is selected.
0 1
AquaCoat
B_03377
27
2. The current limiting can now be
adjusted using the universal rotary
controller (2) between 10 - 100 µA with
a resolution of 1 µA. The value is shown
POWER POWER
0 1
in the LED display (27).
AquaCoat
B_03378
2
AquaCoat GM 5000EACW
54