Start-Up For Spraying - WAGNER AquaCoat AirCoat GM 5000EACW Operating Manual

Aquacoat aircoat-spray system for noncombustible spray media aquacoat aircoat - evomotion 20-30s - wildcat 18-40 - puma 28-40 - cobra 40-10

Table of Contents

EDITION 04/2012

OPERATING MANUAL

5.4.2

START-UP FOR SPRAYING

1. Secure gun and place the appropriate nozzle.

2. Switch on the pump adjust from approx. 8 MPa; 80 bar; 1160 psi, and the control unit.

3. Spray (pull trigger).

4. Adjust the spray pressure at the paint pump according to the nozzle and object being sprayed.

5. Open AirCoat air, approx. 0.01-0.25 MPa; 1-2.5 bar; 14,5-36 psi, and adjust for the optimal atomization.

For round-jet method:

6. By turning the nozzle nut, the atomizing air jet can

additionally be adjusted.

Note:

Do not turn the nozzle nut until it is ﬂ ush with the nozzle

body. There must be play for the atomizing air between the

nozzle nut and the nozzle body.

The air adjustment at the back of the gun does not affect the

spray pattern in this process

For ﬂ at-jet method:

6. Change the width of the spray jet by turning the air

adjustment back to the spray gun or by appropriate selection

of the nozzle.

PART NO. DOC2321362

AquaCoat GM 5000EACW

B_03529

B_03530

Table of Contents