Table of Contents
Advertisement
EDITION 04/2012
OPERATING MANUAL
Insertion position compl. Package
3
2
SW5/ 0.4 - 0.5 Nm
B_03202
4
Ensure the correct
insertion position!
PART NO. DOC2321362
SW5
4
2
1
Tighten slightly AC
valve tip by hand using
an assembly tool.
Part No. 2309368
Assembly tool
Part No. 2325263
AquaCoat GM 5000EACW
Set measure X with withdrawal nut and
then fasten it with the threaded pin
(SW2).
X = 123 ±0.1
Push together the valve rod
unit and the compl. package.
SW6
Screw in together the valve rod unit and
0.4 -
the compl. package.
0.5 Nm
Remove the valve rod unit.
2
Tighten the compl. package.
Carefully insert the valve rod unit and mount
with an assembly tool (5) the clamping screw
assy. (1).
0.5 Nm
5
SW9
1.2 Nm
X
5
Note:
Assembly tool, Steck or box-
end wrench Use (no open-
ended).
SW2
1Nm
B_03557
76
Advertisement
Table of Contents
