WAGNER AquaCoat AirCoat GM 5000EACW Operating Manual page 43

EDITION 04/2012
OPERATING MANUAL
Start-up for spraying:
1. Fill the material container (13) with paint and place in the cabinet.
2. Immerse in paint container the suction system (12).
3. Clamp high voltage cable (22) to the metal paint container (13) or, in the case of a
plastic container, to the metal part of the suction system (12).
4. Connect the AquaCoat system to the electric socket with the electric cable (9).
5. Insert front panel (2).
6. Switch on mains switch on the VM 5000W.
7. The system is ready for use.
Electrical discharge when using coated material containers!
Risk of injury, material charge not optimal
SIHI_0130_GB
5
19
7
PART NO. DOC2321362
Ensure that the metal part of the container is connected to
the HV cable (e.g. remove coating from around the connection
point).
8
3
24
4
80
100
Zerstäu berluft R1 60
80
Atomiz ing Mat. Druckr
air egler 40
Mat. pressu
re reg. Pumpe 60
R2 20
Pump
40
10
20
R3 kV
μA
17
2
AquaCoat GM 5000EACW
CAUTION
10
14
9
Cobra 40-10 mounted to frame
with upper container fi ttings
POWE R
0
1
Aqu aCo at
1
20
26
13
22
15
11
6
23
B_03528
43