Table of Contents
Advertisement
EDITION 04/2012
OPERATING MANUAL
6
MAINTENANCE
➞ Observe general safety instructions in chapter 2.
The AquaCoat spray system must be cleaned and rinsed out every day. Only use the
cleaning solvent recommended by the paint manufacturer.
Incorrect maintenance/repair!
Risk of injury and damage to the equipment
SIHI_0004_GB
Cleaning agent in the air duct!
Functional faults caused by swollen seals
➞ Never immerse the spray gun in cleaning agent or water.
SIHI_0002_GB
PART NO. DOC2321362
Repairs and part replacement may only be carried out by specially
trained staff or a WAGNER service center.
Before all work on the unit and in the event of work interruptions:
- Switch off the energy/compressed air supply.
- Relieve the pressure from the spray gun and unit.
- Secure the spray gun against actuation.
Observe the operating and service instructions when carrying
out all work.
CAUTION
AquaCoat GM 5000EACW
WARNING
64
Advertisement
Table of Contents
