EDITION 04/2012
OPERATING MANUAL
5
START-UP AND OPERATION
5.1
INSTALLATION AND CONNECTION
Incorrect installation/operation!
Risk of injury and damage to equipment
SIHI_0050_GB
Check the individual components of the AquaCoat spray system against the delivery note.
Familiarize yourself with the mode of functioning of the individual components of the
AquaCoat spray system, reading the enclosed operating instructions thoroughly. Note the
special requirements of the electrostatic air spray procedure.
5.1.1
VENTILATION OF THE SPRAY BOOTH
Toxic and/or flammable vapor mixtures!
Risk of poisoning and burns
SIHI_0028_GB
PART NO. DOC2321362
When putting into operation and for all work, read and follow
the operating instructions and safety regulations for the additionally
required system components.
Operate the unit in a spraying booth approved for the working
materials.
-or-
Operate the unit on an appropriate spraying wall with the
ventilation (extraction) switched on.
Observe national and local regulations for the outgoing air
speed.
AquaCoat GM 5000EACW
WARNING
WARNING
33