Setting Example "Parameter C13 - WAGNER AquaCoat AirCoat GM 5000EACW Operating Manual

EDITION 04/2012
OPERATING MANUAL
For ease of operation the confi guration settings are divided into three groups. The fi rst
group is for the end user, the other both groups, protected by a password, are reserved for
Wagner Service and the Wagner production sites or the Wagner Service Center, which have
the necessary infrastructure.
Group 1:
Parameters C11 to C20
(end user)
Group 2:
Parameters C21 to C30
(Wagner service)
Group 3:
Parameters C31 to C40
(production plant, service center)
5.5.3

SETTING EXAMPLE "PARAMETER C13"

After getting started in confi guration mode, the display (27) shows the parameter "C11" by
default. You can change to parameter "C13" by pressing the "Spray current" (5) or the "High
voltage" (7) button.
To change a selected parameter value (e.g. C13), press Push key "standby" (25). The content
of the parameter is displayed in the LED display (27).
PART NO. DOC2321362
R1
R2
R3
25
80 100
60 80
R1
40 60
20 40
R2
10 20
kV μA
R3
7 5 3
AquaCoat GM 5000EACW
27
80 100
60 80
40 60
20 40
10 20
kV μA
8 6 4
27
POWER POWER
0 1
AquaCoat
B_03509
POWER POWER
0 1
AquaCoat
B_03508
62