EDITION 04/2012
OPERATING MANUAL
4.4.1.2.1
AIRCOAT ROUND JET SPRAY PROCESS
In the AirCoat process, high pressure of 3-15 MPa; 30-150 bar; 435-2176 psi is used to atomize the material.The
air at 0-0.25 MPa; 0-2.5 bar; 0-36 psi produces a soft jet. The size of the spray jet can be adjusted by turning the
nozzle nut.
Advantages
High painting capacity
●
Low fogging tendency
●
Good fi nish
●
High viscosity paints can easily be applied
●
High endurance of the nozzles
●
Change in width the jet
●
PART NO. DOC2321362
AirCoat air
Spray material
AirCoat air
Multi-channel
AquaCoat GM 5000EACW
Nozzle nut
swirl nozzle
Spray jet
30