EPSON AcuLaser C2600/2600
4.5.3 Paper Transport
4.5.3.1 ROLLER ASSY., PICK UP
1.
Draw out the Standard lower paper cassette.
Do not remove the two ROLLER ASSY., PICK UPs all at once
C A U T I O N
when performing the following procedure, otherwise the SHAFT,
ROLLER, PICK UP does not rotate when installing them. Make
sure to replace the ROLLER ASSY., PICK UP one by one.
2.
Rotate the SHAFT, ROLLER, PICK UP, stretch the ROLLER ASSY., PICK UP,
and remove the ROLLER ASSY., PICK UP.
Rotate the SHAFT, ROLLER, PICK UP until its cut surface faces
downward, and install the ROLLER ASSY., PICK UP by inserting
its two dowels into the holes. The ROLLER ASSY., PICK UP
cannot be installed inversely as each dowel has different diameter.
Disassembly and Assembly
2-1
2-2
Disassembling/Assembling the Main Unit
2-3
2-2
2-2
2-3
2-2
ROLLER ASSY.,
PICK UP
Reassembly
Figure 4-44. Removal of ROLLER ASSY., PICK UP
Revision B
04003202
253