EPSON AcuLaser C2600/2600
REINSTALLATION
A1. Before installing the TRANSFER UNIT, Assy., ASP to the printer,
C A U T I O N
be sure to cut off and remove the cable tie which secures the
cleaner lever of the assy.
A2. When handling the TRANSFER UNIT, Assy., ASP, beware of the
following instructions.
Do not hold a part other than the handles. (Especially, never
touch the transfer belt surface and the grounding plate that is
attached on the left side of the unit. Avoid the use of the unit
once the transfer belt is damaged.)
Extra caution is required not to touch the surface of the
Transfer belt with bare hands, as it has adverse effect on
image quality. In case you touch the belt with bare hands,
print out a couple of documents in A4 size, and confirm that
image quality is not affected.
Give precautions not to damage or contaminate the surface of
the Transfer belt.
Prevent the Flywheel and the Transfer belt release button
from coming in contact with the frame.
A3. After replacing the TRANSFER UNIT, Assy., ASP, be sure to
secure the ground wire with the retainer as shown in the figure.
Disassembly and Assembly
Disassembling/Assembling the Main Unit
Revision B
287