EPSON AcuLaser C2600/2600
D8. Disconnect the connector of the HARNESS, AC, FU from the POWER SUPPLY.
D9. Remove the 2 screws that secure the HOLDER, COVER, TOP, FRONT.
D10.C.C.S-TITE SCREW,3x8,F/Zn: 2
D11.Release the HARNESS, MAIN and the HARNESS PANEL from the tab of the
HOLDER, COVER, TOP, FRONT.
D12.Press down the HARNESS, AC, FU underneath the HARNESS, MAIN to
remove, and dangle the HOLDER, COVER, TOP, FRONT in front.
D13.As pressing the LEVER, PATCH inward to close the 2 tabs, and remove the
WIRE, PATCH from the LEVER, PATCH.
D14.Disconnect the connector of the HARNESS, HV, 1ST TRANSFER from the
electrode of the TRANSFER UNIT, Assy., ASP.
Disassembly and Assembly
WIRE, PATCH
Disassembling/Assembling the Main Unit
Fuser Cover
Open Sensor
D14
D7
D7
D8
D11
D12-1
D12-2
D9
D9
D13-2
D13-1
D13-1
Figure 4-77. Removal of TRANSFER UNIT, Assy., ASP 2
Revision B
HOLDER, COVER,
TOP, FRONT
04006001
285