Epson AcuLaser C2600 Service Manual page 261

EPSON AcuLaser C2600/2600
4.5.3.7 ROLLER, FEED/ROLLER, FEED; B
ROLLER, FEED
1. Remove the DRIVE ASSY., MPT.
2. Remove the SPUR GEAR, 18, DRIVE from the ROLLER, FEED.
3. Remove the GUIDE ASSY., FEED, LEFT.
4. Remove the 2 E-RING, 5, F/Ucs that secure the BUSHING, 8s (front and rear)
from both ends of the ROLLER, FEED, and slide the BUSHING, 8s (front and
rear) inward.
5. Slide the ROLLER GATE toward rear, draw out the front shaft first and the rear
shaft to remove the ROLLER GATE.
6. Draw out the 2 BUSHING, 8s from both ends of the ROLLER, FEED.
1. Insert the chipped end of the ROLLER GATE to the rear shaft
hole.
ROLLER, FEED; B
1). Remove the DRIVE ASSY., MPT.
2). Remove the RETAINING RING, 4 that secures the SPUR GEAR, 18, DRIVE to
remove the SPUR GEAR, 18, DRIVE from the ROLLER, FEED; B.
1). Attach the RETAINING RING, 4 with its rib facing inward.
3). Remove the GUIDE ASSY., FEED, LEFT.
4). Remove the 2 E-RING, 5, F/Ucs from both ends of the ROLLER, FEED; B, and
slide the BUSHING, 8s (front and rear) inward.
5). Slide the ROLLER, FEED; B toward rear, draw out the front shaft first and the
rear shaft to remove the ROLLER FEED; B.
6). Draw out the 2 BUSHING, 8s from both ends of the ROLLER, FEED; B.
7). Remove the 2 BUSHING, 6, FEEDs from the ROLLER, FEED; B.
Disassembly and Assembly
(p.302)
(p.254)
(p.302)
(p.254)
Disassembling/Assembling the Main Unit
2). Insert the chipped end of the ROLLER, FEED; B to the rear
attachment shaft.
3). Match the 2 salient portions of the BUSHING, 6, FEED with the
groove.
4)-1
4)-2
4-1
4-2
6)
7)
6
5)
5
ROLLER,
FEED;B
ROLLER,
FEED
Reassembly 3)
2)-1
2
Figure 4-52. Removal of ROLLER, FEED/ROLLER, FEED; B
Revision B
4)-1
4)-2
4-1
4-2
7)
6)
6
Reassembly 2)
2)-2
Reassembly 1
04003901
261