Epson AcuLaser C2600 Service Manual page 330

EPSON AcuLaser C2600/2600
A6. While holding down the MOUNTING PLATE ASSY., PINION so as not to shift
its position, screw the MOUNTING PLATE ASSY., PINION together with the
SPUR GEAR,16, MPT.
C.C.SCREW,3x6,F/Uc: 1
A7. Slide the PAPER GUIDE, FRONT, MP and the PAPER GUIDE, REAR, MP,
ASSY. outward and then check the cursor position.
A8. Confirm that the position corresponds with the one checked in the "Removal"
procedure D2.
→
Matched End of the work.
→
Unmatched Go to procedure A9.
A9. Loosen the screw that secure the MOUNTING PLATE ASSY., PINION to slide it
from behind the LIFT PLATE, MP, and adjust the cursor position.
A10.Tighten the screw while holding down the MOUNTING PLATE ASSY., PINION
so as not to shift the cursor position.
Disassembly and Assembly
Figure 4-121. Positioning of the PAPER GUIDE, FRONT, MP and the PAPER
Disassembling/Assembling the Main Unit
A9
MOUNTING PLATE
ASSY., PINION
A9
GUIDE, REAR, MP ASSY.
Revision B
C.C.SCREW,3x6,F/Uc
04010401
330